30 October 2013

Ocean Proof Mobile Phones Through Atomic Layer Deposition and Barrier Films

Scientists have developed a barrier film through through a molecular process called atomic layer deposition (ALD) that can protect objects such as mobile phones from harsh environments such as salt water.

Barrier films are used to protect electronics from water vapor, oxygen degradation, and other harmful elements. Current barrier films although offer protection, the way they are made still result in small impurities and imperfections that can still allow water or oxygen to penetrate.

Using atomic layer deposition, the barrier film is controlled at the molecular level. The process results in an even coating without any holes or impurities that may be penetrated by harmful elements. The finished product is about 10 nanometers thick which is hundreds of times thinner than current available high end barrier films.

By using this process, electronic devices using organic materials such as OLED displays can be developed that last longer. ALso, existing electronic devices such as mobile phones, implantable biomedical devices, and solar power cells can be produced which can operate in extreme conditions.

Barrier Films Through Atomic Layer Deposition

Barrier films, used in everything from food and drug packaging to consumer electronics and solar cells, help prevent your food from spoiling, help to preserve medication, and protect your electronics from damage due to exposure to air or a splash of water. Now a group of researchers in Georgia have developed a new way to produce better films using atomic layer deposition.

These are not the flimsy films of plastic that may seal a package of cookies. High-end barrier films that safeguard your phone's high-tech organic light-emitting diode (OLED) display from every whiff of oxygen or molecule of water vapor require higher performance transparent materials such as metal oxides.

Existing methods for manufacturing these high-performance barriers aren't perfect. Due to the way they're made, they often have small defects, resulting in tiny holes that let in water or oxygen. That's why Samuel Graham and his colleagues at the Georgia Institute of Technology have been exploring how to use atomic layer deposition to produce better barrier films. At the AVS 60th International Symposium and Exhibition, held in Long Beach, Calif. Oct. 27 – Nov. 1, Graham will discuss some of the latest developments in this effort.

Graham and his colleagues have created new barrier films that can protect electronics in very harsh environments – when submerged in salt water for months, for example.

Video: Atomic Layer Deposition

"By creating such barrier films, we are able to extend the lifetime and reliability of electronic devices," Graham said. The new coatings can be used for electronics such as implantable biomedical devices, light-emitting diodes (LED) used in solid-state lighting and displays, solar cells, and organic electrochromic windows, which go from opaque to clear when a voltage is applied. Barrier films will play a large role in the development of many future electronic devices made with organic materials, Graham added.

How Atomic Layer Deposition Works

High-performance barrier films are usually made with techniques such as sputter deposition or plasma-enhanced chemical vapor deposition. In these methods, material is either "sprayed" onto a substrate or grown from a plasma, creating a thin layer that becomes the film. Although efficient and common in industry, these techniques often result in defects, requiring multiple coatings to create good barrier films.

With atomic layer deposition, the researchers have precise control down to the molecular level, allowing them to make thin, even films that have minimal defects. In this process, the researchers surround a substrate with a gas containing a particular metal atom like aluminum. The molecules of the gas attach themselves onto the substrate, forming a single layer of atoms. Next, excess gas is removed from the chamber and another gas is introduced that then oxidizes the metal, creating a metal oxide that's impervious to air or water. The process is repeated to reach the desired thickness, which is only about 10 nanometers. In contrast, films made with more conventional techniques are tens to hundreds of times thicker.

Companies are already developing and selling atomic layer deposition technology, Graham says. But for wide-scale commercial use, more work needs to be done to improve the technology, how fast the materials are deposited, and the chemical stability and mechanical reliability of the films.


American Institute of Physics
Georgia Institute of Technology
AVS 60th International Symposium and Exhibition
Solar Panel Decals Which Can Be Peeled And Applied To Any Surface
New Low Cost And Effective Dye Sensitized Solar Cells Being Developed For Cheap Readily Available Solar Energy
MIT News: Nanoparticle Coating Help Hip And Knee Implant Last Longer
Nanophotonics Allow Color Manipulation A Few Atoms Wide With Opaque Objects
FLUENCE (Fluid-Enhanced Crystal Engineering) Process Results in 10 Times More Efficient Organic Electronics
World Smallest Semiconductor Laser - Breakthrough in Photonic Technology
University of Houston Abstract on Using Polymer Electrolytes on Lithium Ion Batteries
Cheaper, Stable and More Accurate Magnetic Field Sensor Using Organic Spintronics Developed
New Development in Organic Light Emitting Diode (OLED) Production
Engineers Discover New Way To Produce Economic and Efficient Solar Panels
Conductive Liquid Cement Developed From Mayenite and CO2 Laser Beam Heating
New OLED Developed: Spin Polarized Organic LED (Spin OLED)
Three Novel Converters Increases Neutron Detection Efficiency Threefold in Bulk-Micromegas Neutron Detectors
Research and Advances in Bio-Engineered Algae Nanocellulose at 245th National Meeting & Exposition of the American Chemical Society
Latest Studies and Developments in Lithium Ion Battery Technology Presented at American Chemical Society Meet