11 January 2013

MIT News: Polymer Film Uses Water Vapor to Harvest Energy and Generate Electricity For Nanodevices

A polymer is a combination of chemical compounds that is made up of repeating structural units (as in a molecular structure). The structure of the polymer dictates it properties.

Polymers are usually associated with plastics. The material used for credit cards is a polymer, as well as PVC plastics and PET water bottles. But polymers can be in any form. Hairspray and mousse is a polymer. Fabrics like spandex are also polymers. While these are synthetic, there are also natural polymers like rubber and amber.

Since these are created at the molecular level, nanotechnology devices rely on polymers for structural, chemical, or containment purposes.

Recent developments that included polymers are microchips created by self assembling polymer; flicker free, bendable, and shatterproof lighting (FIPEL - Field-Induced Polymer Electroluminescent technology); and Organic Light Emitting Diodes (OLED).

Electricity Generating Polymer Film

MIT engineers have created a new polymer film that can generate electricity by drawing on a ubiquitous source: water vapor.

The new material changes its shape after absorbing tiny amounts of evaporated water, allowing it to repeatedly curl up and down. Harnessing this continuous motion could drive robotic limbs or generate enough electricity to power micro- and nanoelectronic devices, such as environmental sensors.

"With a sensor powered by a battery, you have to replace it periodically. If you have this device, you can harvest energy from the environment so you don't have to replace it very often," says Mingming Ma, a postdoc at MIT's David H. Koch Institute for Integrative Cancer Research and lead author of a paper describing the new material in the Jan. 11 issue of Science.

"We are very excited about this new material, and we expect as we achieve higher efficiency in converting mechanical energy into electricity, this material will find even broader applications," says Robert Langer, the David H. Koch Institute Professor at MIT and senior author of the paper. Those potential applications include large-scale, water-vapor-powered generators, or smaller generators to power wearable electronics.

Other authors of the Science paper are Koch Institute postdoc Liang Guo and Daniel Anderson, the Samuel A. Goldblith Associate Professor of Chemical Engineering and a member of the Koch Institute and MIT's Institute for Medical Engineering and Science.

Harvesting energy

The new film is made from an interlocking network of two different polymers. One of the polymers, polypyrrole, forms a hard but flexible matrix that provides structural support. The other polymer, polyol-borate, is a soft gel that swells when it absorbs water.

Previous efforts to make water-responsive films have used only polypyrrole, which shows a much weaker response on its own. "By incorporating the two different kinds of polymers, you can generate a much bigger displacement, as well as a stronger force," Guo says.

Video: Energy Storing Polymers - Artificial muscles at MIT

The film harvests energy found in the water gradient between dry and water-rich environments. When the 20-micrometer-thick film lies on a surface that contains even a small amount of moisture, the bottom layer absorbs evaporated water, forcing the film to curl away from the surface. Once the bottom of the film is exposed to air, it quickly releases the moisture, somersaults forward, and starts to curl up again. As this cycle is repeated, the continuous motion converts the chemical energy of the water gradient into mechanical energy.

Such films could act as either actuators (a type of motor) or generators. As an actuator, the material can be surprisingly powerful: The researchers demonstrated that a 25-milligram film can lift a load of glass slides 380 times its own weight, or transport a load of silver wires 10 times its own weight, by working as a potent water-powered "mini tractor." Using only water as an energy source, this film could replace the electricity-powered actuators now used to control small robotic limbs.

"It doesn't need a lot of water," Ma says. "A very small amount of moisture would be enough."

Generating electricity

The mechanical energy generated by the material can also be converted into electricity by coupling the polymer film with a piezoelectric material, which converts mechanical stress to an electric charge. This system can generate an average power of 5.6 nanowatts, which can be stored in capacitors to power ultra-low-power microelectronic devices, such as temperature and humidity sensors.

If used to generate electricity on a larger scale, the film could harvest energy from the environment — for example, while placed above a lake or river. Or, it could be attached to clothing, where the mere evaporation of sweat could fuel devices such as physiological monitoring sensors. "You could be running or exercising and generating power," Guo says.

On a smaller scale, the film could power microelectricalmechanical systems (MEMS), including environmental sensors, or even smaller devices, such as nanoelectronics. The researchers are now working to improve the efficiency of the conversion of mechanical energy to electrical energy, which could allow smaller films to power larger devices.

Massachusetts Institute of Technology
MIT News: Microchips Using Self Assembling Polymers
Nanotechnology and Plastics Develop New Type of Lighting That is Flicker-Free, Bendable and Shatterproof
Piezoelectricity: Using Viruses and Nanotechnology To Generate Electricity
Wearable Technology Leads To Clothes That Can Help Rehabilitate Physical Conditions
Piezoelectricity Allows Pacemaker To Operate Without A Battery
Nanobiodevice Captures Cancer Cells in Bloodstream
New OLED Developed: Spin Polarized Organic LED (Spin OLED)
Cheaper, Stable and More Accurate Magnetic Field Sensor Using Organic Spintronics Developed
MIT News: Researchers develop cost-effective way to spin nanoscale fibers
Rechargeable Battery That Can Be Painted On Any Surface Developed
Renewable Battery Cathode Produced from Pulp and Paper Waste
Solar Panel Decals Which Can Be Peeled And Applied To Any Surface
MIT News: Researchers Improve Electron Microscopy Using Engineered Protein Labels
Synthetic Biology Combined With Systems Biology Can Help Artificially Engineered Cells To Solve Environmental Problems
Cyborg Tissues - Bioengineered Tissues With Embedded Nanoelectronics Developed
High Tech Smart Surgical Gloves With Sensors and Circuits Through Nanotechnology

Written by Anne Trafton, MIT News Office